Specifications

SET MODES

To help simplify the operations you might perform at the dive site,

settings are divided into 2 categories. Set Mode #1 includes several

settings that you would change more often and Set Mode #2 includes

those items not likely to change once you set them. Set Mode 2 can

be accessed by first entering settings in Set Mode 1, or by bypassing

Set Mode 1.

After gaining access to Set Mode 1 or Set Mode 2, settings can be

made in sequence one after the other, or you can access a specific

item that you want to set by bypassing others. The descriptions that

follow describe access to each setting from Surface Mode.

Set Mode Access Timing

While in Surface Mode, press Both buttons simultaneously and hold -

 after 2 seconds, SET: 1 appears (Fig. 16)

 after 4 seconds, SET: 2 appears (Fig. 17)

 Access is gained to Set Modes by releasing the buttons during the

2 second window in which SET: 1 or SET: 2 appears, then press-

ing the Advance (Front) button.

 If the buttons are held longer and SET 1 and 2 are both bypassed,

the unit will go to Simulator Mode which is described on page 71.

 While in the Set Mode, if neither button is pressed during a period

of 2 minutes, the unit will revert to Surface Mode.

Fig. 16 - Set Mode 1

Fig. 17 - Set Mode 2