Specifications

TO SET - MAX DEPTH ALARM (while in the Surface Mode)

Factory set for 330 feet, the Maximum Depth Alarm can be set to

values between 30 feet (9 meters) and 330 feet ( 99 meters) in incre-

ments of 10 foot (3 meters).

 Press Both buttons simultaneously, release when SET: 1 appears.

 Press and release the Advance (Front) button, FO2 appears with

the value flashing.

 Press the Advance (Front) button 1 more time.

 The graphics MAX FEET (or M) and dEEP, and Alarm icon ap-

pear with the Max Depth value flashing (Fig. 20).

 Press and release the Select (Bottom) button until the desired

Alarm value appears, or press and hold to scroll through the set

points.

 Press the Advance (Front) button to accept the setting and ad-

vance to Elapsed Dive Time Alarm, or press and hold Both but-

tons for 2 seconds to revert to Surface Mode.

 The unit reverts to Surface Mode after 2 minutes if neither button

is pressed.

Fig. 20 - Set Depth Alarm