Specifications

TO SET - ELAPSED DIVE TIME ALARM

(while in the Surface Mode)

Factory set for 0:00 hr:min, the Alarm can be set to values between

0:10 and 3:00 hr:min in increments of 0:05 hr:min.

 Press Both buttons simultaneously, release when SET: 1 appears.

 Press and release the Advance (Front) button, FO2 appears with

the value flashing.

 Press the Advance (Front) button 2 more times.

 The graphic EdT, and Alarm and Dive Time icons appear with

the Elapsed Dive Time value flashing (Fig. 21).

 Press and release the Select (Side) button until the desired Alarm

value appears, or press and hold to scroll through the set points.

 Press the Advance (Front) button to accept the setting and ad-

vance to PC Interface, or press and hold Both buttons for 2 sec-

onds to revert to Surface Mode.

 The unit reverts to Surface Mode after 2 minutes if neither button

is pressed.

Fig. 21 - Set Elapsed Time

Alarm