Specifications

31
ENTERING SETTINGS -SET MODE #2
NOTE: To return to Surface Mode at any time while
in Set Mode, press and hold Both buttons for 2 sec-
onds. The unit will automatically revert to Surface
Mode after 2 minutes if no button is pressed.
TO SET - UNITS OF MEASURE (while in the Surface Mode)
Factory set for Imperial, Units of Measure can also be set for Metric.
 Press Both buttons simultaneously, release when SET: 2 appears.
 Press and release the Advance (Front) button, the Units screen ap-
pears with the graphics FT (or M), and the Temperature icon and
letter F (or C), and PSI (or BAR) appear flashing (Fig. 23).
 Press and release the Select (Bottom) button to toggle between
Imperial (FT and F ) and Metric (M and C) units.
 Press the Advance (Front) button to accept the setting and advance
to Set Hour Format, or press and hold Both buttons for 2 seconds
to revert to Surface Mode.
Fig. 23 - Set Units of Measure