Specifications

37
TO SET - TURN PRESSURE ALARM
(while in the Surface Mode)
Factory set for 00 PSI/BAR (disabled), the Turn Pressure Alarm can
be set to values between 1000 and 3000 PSI (69 to 205 BAR) in in-
crements of 250 PSI (17 BAR).
 Press Both buttons simultaneously, release when SET: 2 appears.
 Press and release the Advance (Front) button, the Units screen ap-
pears with the set point flashing.
 Press the Advance (Front) button 9 more times.
 The graphic trn and Alarm (speaker) icon appear with the Turn
Pressure Alarm value flashing (Fig. 34).
 Press and hold the Select (Bottom) button to scroll through the
Alarm values.
 Press the Advance (Front) button to accept the setting and ad-
vance to Set End Pressure Alarm, or press and hold Both buttons
for 2 seconds to revert to Surface Mode.
Fig. 32 - Set Turn Pressure Alarm