Specifications

38
TO SET - END PRESSURE ALARM
(while in the Surface Mode)
Factory set for 00 PSI/BAR (disabled), the End Pressure Alarm can
be set to values between 300 and 1500 PSI (20 to 104 BAR) in in-
crements of 100 PSI (7 BAR).
 Press Both buttons simultaneously, release when SET: 2 appears
(4 seconds).
 Press and release the Advance (Front) button, the Units screen ap-
pears with the set point flashing.
 Press the Advance (Front) button 10 more times.
 The graphic End and Alarm (speaker) icon appear with the End
Pressure Alarm value flashing (Fig. 33).
 Press and hold the Select (Bottom) button to scroll through the
Alarm values.
 Press the Advance (Front) button to accept the setting and ad-
vance to Set Dive Time Remaining Alarm, or press and hold Both
buttons for 2 seconds to revert to Surface Mode.
Fig. 33 - Set End Pressure Alarm