Specifications

42
TO SET - BACKLIGHT DURATION
(while in the Surface Mode)
Factory set for 7 (seconds), the Backlight Duration can be set to val-
ues of 0 (button time only), 3, or 7 seconds. This is the length of time
the Backlight will stay on after the button is released.
 Press Both buttons simultaneously, release when SET: 2 appears.
 Press and release the Advance (Front) button, the Units screen ap-
pears with the set point flashing.
 Press the Advance (Front) button 14 more times.
 The graphic GLO and Time icon appear with the Duration value
flashing (Fig. 37).
 Press and release the Select (Bottom) button to advance the Dura-
tion from :00 to :03 to :07 (seconds)
 Press the Advance (Front) button to accept the setting and advance
to Set Sampling Rate, or press and hold Both buttons for 2 seconds
to revert to Surface Mode.
Fig. 37 - Set Backlight Duration