Specifications

TO SET - DIGITAL GAUGE MODE ON/OFF

(while in the Surface Mode)

Factory set OFF, User Set Digital Gauge Mode can also be set ON.

This feature is also described on page 67.

NOTE: Once a dive is made with this feature set

ON, the setting will be locked ON for 24 hours after

the dive. Set Digital Gauge Mode will not appear as

a selection for 24 hours after the dive.

 Press Both buttons simultaneously, release when SET: 2 appears.

 Press and release the Advance (Front) button, the Units screen ap-

pears with the set point flashing.

 Press the Advance (Front) button 16 more times.

 The graphic GAU appears with OFF (or ON) flashing (Fig. 39).

 Press and release the Select (Bottom) button to toggle between

ON and OFF.

 Press the Advance (Front) button to accept the setting and ad-

vance to Set Water Activation, or press and hold Both buttons for

2 seconds to revert to Surface Mode.

Fig. 39 - Set Digital Gauge Mode