Specifications

45
TO SET - WATER ACTIVATION (while in the Surface Mode)
Factory set ON, this feature can also be set OFF (disabled). When
set ON, the ATMOS
ai
will automatically Activate and enter Dive
Mode upon immersion in water and descent to 5 feet (1.5 meters).
WARNING: If the Water Activation feature is set
OFF, the ATMOS
ai
must be manually (push button)
activated prior to commencing a dive.
 Press Both buttons simultaneously, release when SET: 2 appears.
 Press and release the Advance (Front) button, the Units screen ap-
pears with the set point flashing.
 Press the Advance (Front) button 17 more times (16 more times
if a dive was made with Digital Gauge Mode set ON).
 The graphics ACT and H2O appear with On (or OFF) flashing
(Fig. 40).
 Press and release the Select (Bottom) button to toggle between
On and OFF.
 Press the Advance (Front) button to accept the setting and revert
to Surface Mode.
Fig. 40 - Set Water Activation