Specifications

DIVE MODE BAR GRAPHS

As your depth and elapsed dive time increase, the Nitrogen Bar Graph (Fig. 43a) will fill with seg-

ments (green toward red) to represent the absorption of nitrogen.

While ascending to shallower depths, the segments that have filled the Nitrogen Bar Graph will begin

to recede, offering a graphic representation of your multilevel diving capability.

If FO2 was set for a numerical value (nitrox), the O2 Bar Graph (Fig. 43b) will fill with segments

(green toward red) to represent oxygen accumulation for that dive or 24 hour period, whichever

amount is greater.

The Variable Ascent Rate Indicator (Fig. 43c) shows how fast you are ascending. When you ex-

ceed the maximum recommended ascent rate for the depth you are at, it will enter the red (Too Fast)

zone and you will be alerted by all segments of the bar graph flashing, the graphic TOO FAST,and

an Audible alarm (unless set OFF). The warnings will stop when your ascent rate is slowed.

CONTROL OF DISPLAYS

During No Decompression conditions, various displays of informa-

tion (up to 3) are available. Each provides Depth, Dive Time Re-

maining, and additional information. The intent of this feature is to

provide the diver control of how much information is on display at

any given time during the dive. The diver can change from one dis-

play to another as often as desired by pressing the Advance (Front)

button, otherwise it does not change.

Fig. 43 - Bar Graphs