Specifications

71
To view that dive's Log (Fig. 65) -
Refer to page 74 for a description of the Log Mode and displays.
 press the Advance (Front) button 1 time
 press the Select (Bottom) button 1 time to view the Nitrogen data
screen
 press the Select (Bottom) button again to view the Oxygen data
screen (if a nitrox dive)
 press Both buttons simultaneously for 2 seconds to return to Sur-
face Mode
 the unit will automatically revert to Surface Mode after 2 minutes
if no button is pressed
Log Data will not be stored in the unit's memory until the 10 minute
Transition Period on the surface is completed.
Once 10 minutes have elapsed, the Surface Mode icon and Surface
Interval time display colon stop flashing indicating that the Dive and
Transition Period are completed, and a subsequent descent will be
considered a new dive.
If you descend during the 10 minute Transition Period, time under-
water will be considered a continuation of that dive. The time at the
surface (if less than 10 minutes) will not be added as Dive Time.
Fig. 65 - Log Mode