Specifications

80
SIMULATOR MODE
This mode provides you with the ability to practice various dive
mode scenarios and computer functions while observing the various
displays.
 The Backlight functions as it normally does.
 At any time while in Simulator Mode, pressing and holding both
buttons simultaneously for 2 seconds shall revert operation to real
Surface Mode.
 The real set points entered into the ATMOS
ai
do not affect the
operation of the Simulator which has its own settings that allow
Digital Gauge Mode to be set ON or OFF, calculations to be
cleared, and FO2 to be set.
Access and Setup (while in real Surface Mode)
 Press and hold Both buttons for 6 seconds.
 Release the buttons during the 2 second window when SIM and
DEMO appear (Fig. 76).
 Press and release the Advance (Front) button to access SIM
MODE. The graphics GAU and DEMO will appear with OFF
(or ON) flashing (Fig. 77).
 When set ON, the SIMULATOR will operate as the unit would in
User Set Digital Gauge Mode only displaying Depth and Elapsed
Dive Time. When set OFF, it operates as it would as an Air or
Nitrox computer.
Fig. 77 - Set Demo Gauge
Fig. 76 - Simulator Mode