Specifications

Surfacing from a Simulated Dive

The Simulator will enter Demo Surface Mode (Fig. 85) upon as-

cending to 3 feet (1 meter) or shallower.

 Press and hold the Select (Bottom) button for 4 seconds to access

Time Acceleration. The small Time Clock icon will begin flash-

ing.

 Tap (press/release) the Select (Bottom) button to increase Surface

Interval Time 1 minute per real time second.

 Tap (press/release) the Select (Bottom) button during the Time

Acceleration to restore the time rate to normal.

 FO2 can be set 10 minutes after surfacing.

 Tap (press/release) the Advance (Front) button to access FO2 Set

Mode. The FO2 graphic and value previously set will appear with

the value flashing.

 Press/release the Select (Bottom) button to increase the FO2 value

in increments of 1%, or press and hold it to scroll.

 Tap (press/release) the Advance (Front) button to accept the FO2

setting and return to Demo Surface Mode.

 To make another dive, press and hold the Select (Bottom) button

for 2 seconds to access Dive Mode.

 To revert operation to real Surface Mode (Fig. 86), press and hold

Both buttons simultaneously for 2 seconds.

Fig. 85 - Demo Surface Mode

Fig. 86 - Real Surface Mode