Specifications

90
To Obtain Service
Take you ATMOS
ai
to an Authorized AERIS Dealer or send it to the nearest AERIS Regional Dis-
tributor Facility.
To return your ATMOS
ai
to AERIS:
 Record all dive data in the Log and/or download the data in memory. All data will be erased
when it receives factory service.
 Package it using a protective cushioning material.
 Include a legible note stating specific reason for return, your name, address, daytime phone num-
ber, serial number, and a copy of your original sales receipt and Warranty Registration Card.
 Send freight prepaid and insured using a traceable method to the nearest AERIS Regional Service
Facility, or to AERIS.
 Non-warranty service must also be prepaid (call for an estimate). COD is not accepted.
 If you have any questions regarding service, call AERIS Customer Service at [phone], 8
to 5 PST, or E-mail them to [e-mail].
NOTE: The procedures that follow must be closely adhered to. Damage due
to improper Battery replacement is not covered by the ATMOS
ai
's 2 year war-
ranty.
BATTERY REPLACEMENT
The Battery Compartment should only be opened in a dry and clean environment with extreme care
taken to prevent the entrance of moisture or dust. As an additional precautionary measure to prevent
formation of moisture in the Battery Compartment, it is recommended that the Battery be changed in
an environment equivalent to the local outdoor temperature and humidity (e.g., do not change the
Battery in an air conditioned environment then take it outside during a hot sunny day).