Specifications

Fig. 88 - Battery Hatch

 Inspect the Buttons, Lens, and Housing to ensure they are not

cracked or damaged.

 If there is any sign of moisture in the module, DO NOT use the

ATMOS

until it receives proper service by an Authorized Aeris

Dealer, or the Aeris factory.

WARNING: If damage, moisture, or corrosion is

found, it is recommended that you return your

ATMOS

to an Authorized AERIS Dealer, and DO

NOT attempt to use it until it has received factory

prescribed service.

NOTE: If the old battery can be removed and the

new one inserted within 8 seconds, nitrogen and

oxygen calculations ,and settings, will be retained

for repetitive dives.

Battery Removal

Examine the Case Back to locate the Battery Hatch (Fig. 88a).

 Apply a coin (not a screwdriver) to the slot of the Battery Hatch

and turn counter clockwise to remove it from the Housing.

 Inspect the O-ring for any signs of deterioration. If found, remove

the O-ring by pressing the sides with your finger tips to cause it to

protrude slightly from the grooves of the Battery Hatch and dis-

card. DO NOT use tools to remove.