Product Info
Table Of Contents
- 1.1 About this manual 2
- 1.2 Explanation of signal words and symbols 2
- 1.3 Customer service & service 3
- 2.1 Intended use 4
- 2.2 Warnings and occupational health and safety 4
- 2.3 Safety standards 5
- 5.1 Technical requirements 7
- 5.2 SQL database configuration 7
- 5.3 System software 7
- 8.1 Installation 12
- 9.1 Configuration at the factory 18
- 9.2 Retrofitting the IN and OUT devices with SMART MOVE 18
- 9.3 Decommissioning and disassembly 19
- 9.4 Disposal 19
- 1 General
- 2 Safety
- 3 Scope of delivery
- 4 SMART MOVE system
- 5 System requirements
- 6 Technical Data
- 7 Configuring beacons
- 8 Installing beacons in the lane
- 9 Configuring the IN and OUT devices
- 10 Version overview
System requirements 5
© DESIGNA Verkehrsleittechnik GmbH 9
DESIGNA SMART MOVE_Installation_110_ENG.docx
(Refer to the separate operator manual WinOperate Items and
groups/ Produce card.)
For the logged-in operator to be able to assign the card,
the operator must have the appropriate user rights (see
above).
Using the Assign function, the SMART MOVE server generates a
unique identification number (ETC number) for the season parker
card.
When setting up the app, car park customers register with their email
address (see separate manual SMART MOVE parking app).
After subsequent comparison with the SMART MOVE server, the season
parker card with the assigned identification number can be found via the
email address and used for entering and exiting the car park (refer to
Chapter 3 SMART MOVE SYSTEM).