Product Info
Table Of Contents
- 1.1 About this manual 2
- 1.2 Explanation of signal words and symbols 2
- 1.3 Customer service & service 3
- 2.1 Intended use 4
- 2.2 Warnings and occupational health and safety 4
- 2.3 Safety standards 5
- 5.1 Technical requirements 7
- 5.2 SQL database configuration 7
- 5.3 System software 7
- 8.1 Installation 12
- 9.1 Configuration at the factory 18
- 9.2 Retrofitting the IN and OUT devices with SMART MOVE 18
- 9.3 Decommissioning and disassembly 19
- 9.4 Disposal 19
- 1 General
- 2 Safety
- 3 Scope of delivery
- 4 SMART MOVE system
- 5 System requirements
- 6 Technical Data
- 7 Configuring beacons
- 8 Installing beacons in the lane
- 9 Configuring the IN and OUT devices
- 10 Version overview
Configuring the IN and OUT devices 9
© DESIGNA Verkehrsleittechnik GmbH 19
DESIGNA SMART MOVE_Installation_110_ENG.docx
9.3 Decommissioning and disassembly
1. Disassemble the SMART MOVE components in reverse order to that
described for installation (see Section 7.1. Installation)
2. Disassemble the device into its individual parts.
For decommissioning and disassembly, refer to the separate operator
manuals of the devices.
9.4 Disposal
The SMART MOVE components consist of recyclable materials.
After correct disassembly, separate recyclable materials according
to their typology and recycle them.