Product Info
Table Of Contents
- 1.1 About this manual 2
- 1.2 Explanation of signal words and symbols 2
- 1.3 Customer service & service 3
- 2.1 Intended use 4
- 2.2 Warnings and occupational health and safety 4
- 2.3 Safety standards 5
- 5.1 Technical requirements 7
- 5.2 SQL database configuration 7
- 5.3 System software 7
- 8.1 Installation 12
- 9.1 Configuration at the factory 18
- 9.2 Retrofitting the IN and OUT devices with SMART MOVE 18
- 9.3 Decommissioning and disassembly 19
- 9.4 Disposal 19
- 1 General
- 2 Safety
- 3 Scope of delivery
- 4 SMART MOVE system
- 5 System requirements
- 6 Technical Data
- 7 Configuring beacons
- 8 Installing beacons in the lane
- 9 Configuring the IN and OUT devices
- 10 Version overview
General 1
© DESIGNA Verkehrsleittechnik GmbH 3
DESIGNA SMART MOVE_Installation_110_ENG.docx
Hints and recommendations
… highlights useful hints and recommendations as well as
information for an efficient and trouble-free operation.
Functional symbols and
designations
The following symbols and designations are used in the instructions:
−
Instructions specified in warnings
List
1.
Step-by-step instructions
Instructions without fixed sequence
Result of the action
italic
Italic text refers to a component in a figure or a different
chapter of these instructions or related instructions.
1.3 Customer service & service
Your DESIGNA Service is available to you for technical information.
For the address, see invoice, delivery note or imprint.
In order to enable fast handling note the data of the type
plate such as device type, order number, identity number,
serial number, etc. before calling.