Product Info
Table Of Contents
- 1.1 About this manual 2
- 1.2 Explanation of signal words and symbols 2
- 1.3 Customer service & service 3
- 2.1 Intended use 4
- 2.2 Warnings and occupational health and safety 4
- 2.3 Safety standards 5
- 5.1 Technical requirements 7
- 5.2 SQL database configuration 7
- 5.3 System software 7
- 8.1 Installation 12
- 9.1 Configuration at the factory 18
- 9.2 Retrofitting the IN and OUT devices with SMART MOVE 18
- 9.3 Decommissioning and disassembly 19
- 9.4 Disposal 19
- 1 General
- 2 Safety
- 3 Scope of delivery
- 4 SMART MOVE system
- 5 System requirements
- 6 Technical Data
- 7 Configuring beacons
- 8 Installing beacons in the lane
- 9 Configuring the IN and OUT devices
- 10 Version overview
4 SMART MOVE system
6 © DESIGNA Verkehrsleittechnik GmbH
DESIGNA SMART MOVE_Installation_110_ENG.docx
4 SMART MOVE system
Fig. 1: SMART MOVE system
The SMART MOVE system enables ticketless entry and exit to car parks
through the app installed on your smart device.
The beacons installed in the car parks communicate with the SMART
MOVE app via Bluetooth Low Energy.
After registering with the SMART MOVE car park operator, car park
customers receive the necessary SMART MOVE access data. Car park
customers can then log into the SMART MOVE app using the access
data sent to their email address stored in the system. The SMART MOVE
server assigns a unique ID number to each user. Additionally, the app
receives a list of available beacons from the SMART MOVE server.
When entering and exiting a car park, the beacon is recognised by the
activated app and a connection to the beacon is established.
The ID number stored in the app is transferred to the DESIGNA system
(database server/cloud) via the beacon. Once the ID number has been
verified, customers can enter or exit the car park.
Communication between the DESIGNA system and the SMART MOVE
server results in the parking data being sent to the SMART MOVE server
for further processing.