Product Info
Table Of Contents
- 1.1 About this manual 2
- 1.2 Explanation of signal words and symbols 2
- 1.3 Customer service & service 3
- 2.1 Intended use 4
- 2.2 Warnings and occupational health and safety 4
- 2.3 Safety standards 5
- 5.1 Technical requirements 7
- 5.2 SQL database configuration 7
- 5.3 System software 7
- 8.1 Installation 12
- 9.1 Configuration at the factory 18
- 9.2 Retrofitting the IN and OUT devices with SMART MOVE 18
- 9.3 Decommissioning and disassembly 19
- 9.4 Disposal 19
- 1 General
- 2 Safety
- 3 Scope of delivery
- 4 SMART MOVE system
- 5 System requirements
- 6 Technical Data
- 7 Configuring beacons
- 8 Installing beacons in the lane
- 9 Configuring the IN and OUT devices
- 10 Version overview
System requirements 5
© DESIGNA Verkehrsleittechnik GmbH 7
DESIGNA SMART MOVE_Installation_110_ENG.docx
5 System requirements
5.1 Technical requirements
The following technical requirements are necessary to ensure successful
operation of the SMART MOVE system.
The operator should operate the parking management system via a
DESIGNA CLOUD application or using an on-premise solution with a
system version X20 or higher. If no CLOUD solution is used, a DSL
connection with a fixed IP address is required as well as a firewall or
router.
Users require a smartphone (version iOS 9.0 / Android 6.0 or higher),
equipped with Bluetooth (version 4.0 LE), and a mobile phone
connection.
5.2 SQL database configuration
The SQL database is configured by your DESIGNA Support.
SySDataConfig
The following settings must be carried out in the SySDataConfig:
ConfigToken:
QINKK_URL
ConfigValue:
https://designaqinkk.westeurope.cloudapp.azure.com:8890/qinkk/160/
ServiceDBeaconREST.svc/Callers/
5.3 System software
In order to be able to use the SMART MOVE app, the data of the app
user, e.g. email address, must be stored in the WinOperate system
software. Further, to set up the app user in the system software, it is
necessary for the operator to be given the appropriate user rights in the
rights management.
5.3.1 Setting up the login group
In order for the system software operator to set up the app user, the
logged-in operator must be assigned to the appropriate login group in the
rights management that has the user right to assign the app user to the
SMART MOVE function.
In the login group of the logged-in operator, activate the user right
Items and groups/ Assign Smart Move.