Installation Instructions

Designer’s Image Natural Stone Ledger panels are trimmed pieces of natural

ledger stone afxed together to form modular panels, which allows for the

streamlined installation of dry stacked ledge stone veneer. Designer’s Image

Natural Stone Veneer panels feature a unique joint design that becomes virtually

undetectable after installation. We offer these panels in two styles: Natural stone

ledger stepped panels and “L“ ledger stepped panel corners for outside corner.

Designer’s Image Natural Stone Ledger Panels can be used to create beautiful

stone veneer on interior or exterior walls. Substrate should be structurally sound,

clean, dry and free of debris. Substrate can be cement block wall or cement

board attached to wall.

Working from the bottom of the wall upward, coat the wall with 0.5inch

plus layer of mortar, covering slightly more than the width of each panel.

Apply layer of mortar to the back of the ledger panel and press the

panel rmly in place. To ensure maximum bond of each panel to the wall

surface, use a rubber mallet to tap each ledger panel in to its nal position.

Repeat step # 2, adding panels in a linear direction (end-to-end, rather

than stacking) to create multiple layers of panels until the desired height is

reached.

Standard 6x24” Natural Ledger Panels feature Stepped Cut design which

creates a seamless look, as random stone pieces were set by a craftsman.

To protect your stone from stains and spills, we recommend sealing the

stone surfaces.

Natural Quartzite & Slate Stone Ledger Panels

Stepped Panels

Installation Guidelines

Panel A

Both ends are “Stepped” cut

Stepped Panels are designed

to interlock together like

puzzle pieces.

Panel A will lock into Panel B

and so on for a seamless t.

Panel B

Dorado Piedra

Carbon Rustic