SDS

ManualsBrandsDesigner's Image ManualsBuilding materialsBronze Top Bracket Kit - 4 pk

PFB706S4

SAFETY DATA SHEET

PFB706S4 v2.0

en/US

1. Identiﬁcation of the substance/mixture and of the company/undertaking

Product name AR400 RICH BLACK MATTE

Product code PFB706S4 Formula Date: 2015-02-20

Intended use Coating powder for professional use

Powder application by electrostatic spraying

Axalta Powder Coating Systems USA, Inc.

9800 Genard Rd

US Houston, TX 77041

Telephone Product information (800) 438-3876

Medical emergency (855) 274-5698

Transportation emergency (800) 424-9300 (CHEMTREC)

2. Hazards identiﬁcation

This preparation is hazardous per the following GHS criteria

GHS-Classiﬁcation

Acute inhalation toxicity Category 4

Serious eye damage/eye irritation Category 1

Skin sensitisation Category 1

Germ cell mutagenicity Category 1B

Target Organ Systemic Toxicant - Repeated exposure Category 2

Endpoints which are “”not classiﬁed“”, “”cannot classiﬁed“” and “”not applicable“” are not shown

GHS-Labelling

Hazard symbols

Signal word Danger

Hazard statements Harmful if inhaled.

Causes serious eye damage.

May cause an allergic skin reaction.

May cause genetic defects.

May cause damage to organs through prolonged or repeated exposure.

Precautionary statements Contaminated work clothing should not be allowed out of the workplace.

Do not breathe dust/ fume/ gas/ mist/ vapours/ spray.

Obtain special instructions before use.

Use only outdoors or in a well-ventilated area.

Wear protective gloves/protective clothing/eye protection/face protection.

IF INHALED: Remove person to fresh air and keep comfortable for breathing.

IF exposed or concerned: Get medical advice/ attention.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if

present and easy to do. Continue rinsing.

IF ON SKIN: Wash with plenty of soap and water.

If skin irritation or rash occurs: Get medical advice/ attention.

Immediately call a POISON CENTER or doctor/ physician.

Speciﬁc treatment (see supplemental ﬁrst aid instructions on this label).

Wash contaminated clothing before reuse.



Copies may be made only for those using Axalta Coating Systems products.

1 - 9

2015-05-13

Summary of content (9 pages)

PAGE 1
SAFETY DATA SHEET PFB706S4 v2.0 en/US 1. Identification of the substance/mixture and of the company/undertaking Product name AR400 RICH BLACK MATTE Product code PFB706S4 Formula Date: 2015-02-20 Intended use Coating powder for professional use Powder application by electrostatic spraying Axalta Powder Coating Systems USA, Inc. 9800 Genard Rd US Houston, TX 77041 Telephone Product information Medical emergency Transportation emergency (800) 438-3876 (855) 274-5698 (800) 424-9300 (CHEMTREC) 2.
PAGE 2
SAFETY DATA SHEET PFB706S4 v2.0 en/US Store locked up. Dispose of contents/container in accordance with local regulations. Other hazards which do not result in classification Contains epoxy constituents. See information supplied by the manufacturer. The following percentage of the mixture consists of ingredient(s) with unknown acute toxicity: 0% 3. Composition/information on ingredients Mixture of synthetic resins and pigments Components CAS-No.
PAGE 3
SAFETY DATA SHEET PFB706S4 v2.0 en/US Indication of Immediate medical attention and special treatment needed if necessary No data available on the product. See section 3 and 11 for hazardous ingredients found in the product. 5.
PAGE 4
SAFETY DATA SHEET PFB706S4 v2.0 en/US Requirements for storage areas and containers Observe label precautions. Store in a dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorized access. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Advice on common storage Store separately from oxidizing agents and strongly alkaline and strongly acidic materials. 8.
PAGE 5
SAFETY DATA SHEET PFB706S4 v2.0 en/US 9. Physical and chemical properties Appearance Form: solid Colour: black Flash point Lower Explosive Limit Upper Explosive Limit Evapouration rate Vapor pressure of principal solvent Water solubility Vapor density of principal solvent (Air = 1) Approx. Boiling Range Approx.
PAGE 6
SAFETY DATA SHEET PFB706S4 v2.0 en/US 11. Toxicological information Information on likely routes of exposure Inhalation Dust generated from this product may be irritating to the respiratory tract. Ingestion May result in gastrointestinal distress. Skin or eye contact Dust generated from this product may cause irritation of the eyes. Repeated or prolonged contact may cause skin irritation with discomfort and dermatitis.
PAGE 7
SAFETY DATA SHEET PFB706S4 v2.0 en/US Target Organ Systemic Toxicant - Single exposure Not classified according to GHS criteria Target Organ Systemic Toxicant - Repeated exposure No data available. Aspiration toxicity Not classified according to GHS criteria Numerical measures of toxicity (acute toxicity estimation (ATE),etc. ) No information available.
PAGE 8
SAFETY DATA SHEET PFB706S4 v2.
PAGE 9
SAFETY DATA SHEET PFB706S4 v2.0 en/US axalta.us PFB706S4 c 2015 Axalta Coating Systems, LLC and all affiliates. All rights reserved. Copies may be made only for those using Axalta Coating Systems products.