SDS

PFB706S4
SAFETY DATA SHEET
PFB706S4 v2.0
en/US
Store locked up.
Dispose of contents/container in accordance with local regulations.
Other hazards which do not result in classification
Contains epoxy constituents. See information supplied by the manufacturer.
The following percentage of the mixture consists of ingredient(s) with unknown acute toxicity:
0 %
3. Composition/information on ingredients
Mixture of synthetic resins and pigments
Components
CAS-No. Chemical Name Concentration
2451-62-9 1,3,5- triglycidyl isocyanurate 4 - 15%
65997-17-3 Glass oxide 4 - 15%
Non-regulated ingredients 80 - 90%
OSHA Hazardous: Yes
4. First aid measures
Eye contact
Remove contact lenses. Irrigate copiously with clean, fresh water for at least 15 minutes, holding the eyelids apart. Seek medical
advice.
Skin contact
Do NOT use solvents or thinners. Take off contaminated clothing and shoes immediately. Wash skin thoroughly with soap and water
or use recognized skin cleanser. If skin irritation persists, call a physician.
Inhalation
Avoid breathing dust. Inhalation of dust may cause shortness of breath, tightness of the chest, a sore throat and cough. Move to
fresh air. If breathing is irregular or stopped, administer artificial respiration. If symptoms persist, call a physician.
Ingestion
If swallowed, seek medical advice immediately and show this container or label.
Most Important Symptoms/effects, acute and delayed
Inhalation
Dust generated from this product may be irritating to the respiratory tract.
Ingestion
May result in gastrointestinal distress.
Skin or eye contact
Dust generated from this product may cause irritation of the eyes. Repeated or prolonged contact may cause skin irritation with
discomfort and dermatitis.
c
 2015 Axalta Coating Systems, LLC and all affiliates. All rights reserved.
Copies may be made only for those using Axalta Coating Systems products.
2 - 9
2015-05-13