SDS
PX00-00023
Skin or eye contact
Dust generated from this product may cause irritation of the eyes. Repeated or prolonged contact may cause skin irritation with
discomfort and dermatitis. Skin contact my cause skin sensitization.
Protection of first-aiders
No information available.
Notes to physician
No data available on the product. See section 3 and 11 for hazardous ingredients found in the product.
Section 5 - Fire-fighting Measures
Suitable extinguishing media
Water sprayDry chemical
Extinguishing media which shall not be used for safety reasons
High volume water jet
Specific hazards
Do not allow run-off from fire fighting to enter drains or water courses. Always keep in containers of same material as the
original one.
Specific fire fighting methods and special protective equipment for fire fighters
Wear as appropriate: Full protective flameproof clothing. Wear self contained breathing apparatus for fire fighting if necessary.
Section 6 - Leak Emergency Treatment
Protective measures, devices and emergency treatment procedure for workers
Keep away from sources of ignition. Air out the room. Do not breathe dust. Comply with safety directives (see chapters 7 and 8).
Environmental protection measures
Do not let product enter drains. Notify the respective authorities in accordance with local law in the case of contamination of
rivers, lakes or waste water systems.
Collection of leaking materials, removal method and materials used for disposal
Contain and collect spillage with a electrically protected vacuum cleaner or by wet brushing and place in container for disposal
according to local regulations. Do not use a dry brush as dust clouds or static can be created! The contaminated area should
be cleaned up immediately with a suitable decontaminant. One possible (flammable) decontaminant comprises (by volume):
water (45 parts), ethanol or isopropyl alcohol (50 parts), concentrated (d : 0,880) ammonia solution (5 parts). A non-flammable
alternative is sodium carbonate (5 parts), water (95 parts). Add the same decontaminant to the remnants and let stand for
several days until no further reaction in non-sealed container. Once this stage is reached, close container and dispose according
to local regulations (see section 13).
Prevention of secondary hazards
No information available.
Section 7 - Operation Handling and Storage
Operation Handling
Persons with a history of skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be
employed in any process in which this mixture is being used. It is recommended that advice is taken from a competent
occupational health practitioner on the assessment of employees with skin or respiratory complaints before the individual is
exposed to the uncured product.
Technical measures/Precautions
Operators should wear antistatic footwear and clothing. Keep away from open flames, hot surfaces and sources of ignition.
Precautions for safe handling
Precautions should be taken to prevent the formation of dusts in concentrations above flammable, explosive or occupational
exposure limits. Preparation may charge electrostatically: always use grounded leads when transferring from one container to
another. Electrical equipment and lighting should be protected to appropriate standards to prevent dust coming into contact with
hot surfaces, sparks or other ignition sources.
SAFETY DATA SHEET
Compliant with GB/T16483 and GB/T17519
c
2014 Axalta Coating Systems, LLC and all affiliates. All rights reserved.
Copies may be made only for those using Axalta Coating Systems products.
Revision Date: 2015-01-15
Print Date: 2015-01-15
en/CNPage3-8