Safety Data Sheets (SDS)

ManualsBrandsDesigner's Image ManualsBuilding materialsWhite Aluminum Railing Straight Bracket

PX00-00023

Hygiene measures

Smoking, eating and drinking should be prohibited in the application area.

Storage

Suitable storage conditions

Observe label precautions. Store between 5 and 25

◦

C in a dry, well ventilated place away from sources of heat, ignition and

direct sunlight. No smoking. Prevent unauthorized access. Containers which are opened must be carefully resealed and kept

upright to prevent leakage.

Suitable container and packaging materials for safe storage

Always keep in containers made of the same material as the supply container.

Section 8 - Exposure Control and Personal Protection

Persons with a history of skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be

employed in any process in which this mixture is being used.

Engineering controls

Provide adequate ventilation. Air-fed protective respiratory equipment must be worn by spray operator even when good

ventilation is provided.

Occupational Exposure Limits

Chemical

Name

Occupational Exposure

Limits

Regulation

Biological occupational exposure limits

No information available.

Personal protective equipment

Personal protective equipment should be worn to prevent contact with eyes, skin or clothing.

Respiratory protection

If dust formation exceeds the air concentration limits, then a respiratory protection device approved for this purpose must be

worn.

Hand protection

The breakthrough time of gloves is unknown for the product itself. The glove material given is recommended on basis of the

substances in the preparation.

Glove material Glove thickness Break through time

Nitrile rubber 0.33 mm > 240 min

The protective glove should be checked in each case for their work speciﬁc suitability (e.g. mechanical stability, product

compatibility, and anti-static properties). After contamination, the glove has to be changed. Care should be taken when

working with sharp edged articles as these can easily damage the gloves and make them ineffective. The instructions and

information provided by the glove supplier on use, storage, maintenance and replacement must be followed. Damaged gloves or

those showing signs of wear should be replaced immediately. Preventive skin protection such as skin protective cream is

recommended. Work tasks should be arranged in such a way that gloves do not have to be worn continuously.

TITANIUM DIOXIDE

PARAFFIN WAX

BARIUM SULFATE

ALUMINUM OXIDE

CARBON BLACK

AMORPHOUS SILICA

HYDROCARBON WAX

POLYETHYLENE

MICA

ALUMINUM

QUARTZ-CRYSTALLINE SILICA

8 mg/m3 TWA

2 mg/m3 TWA

5 mg/m3 TWA

4 mg/m3 TWA

5 mg/m3 TWA

2 mg/m3 TWA

5 mg/m3 TWA

1.5 mg/m3 TWA

3 mg/m3 TWA

0.7 mg/m3 TWA

GBZ2.1 Occupational Exposure Limits for Hazardous Agents in the Workplace:Chemical Hazardous Agents

SAFETY DATA SHEET

Compliant with GB/T16483 and GB/T17519

Copies may be made only for those using Axalta Coating Systems products.

Revision Date: 2015-01-15

Print Date: 2015-01-15

en/CNPage4-8