Technical Specifications
Code Compliance Research Report CCRR-1104 Page 3 of 8
545 E. Algonquin Road • Arlington Heights • Illinois • 60005
intertek.com/building
PCA-101
Version: 21 December 2017 SFT-CCRR-OP-40b
7.0 SUPPORTING EVIDENCE
7.1 Drawings and installation instructions submitted by the
manufacturer.
7.2 Reports of testing and engineering analysis
demonstrating compliance with ICC-ES AC 174, Acceptance
Criteria for Deck Board Span Ratings and Guardrail Systems
(Guards and Handrails), revised February 2014, and ASTM
D7032-10a, Standard Specification for Establishing
Performance Ratings for Wood-Plastic Composite Deck
Boards and Guardrail Systems (Guards or Handrails).
7.2.1 Within the scope of this report, the following
versions of referenced standards are deemed equivalent.
Standard Version(s)
ASTM D7032 08 10a
ASTM E84 09 13a
7.3 Documentation of an Intertek approved quality control
system for the manufacturing of products recognized in
this report.
7.4 Intertek Listing Report titled "Shanghai Longjie Plastics
Co., Ltd. - Model 1121660 PVC Rail Systems" on the
Intertek Directory of Building Products
.
8.0 IDENTIFICATION
Model 1121660 PVC Rail Systems produced in accordance
with this report shall be identified with labeling on the
individual components or the packaging that includes the
following information:
8.1 Name and/or trademark of the manufacturer;
8.2 The following statement: "See CCRR-1104 at
https://bpdirectory.intertek.com
for uses and
performances levels";
8.3 For the 36 inch guardrails the following statement:
"For Use in One- and Two-Family Dwellings Only";
8.4 The Intertek Mark as shown below and the Code
Compliance Research Report number (CCRR-1104).
9.0 OTHER CODES
This section is not applicable.
10.0 CODE COMPLIANCE RESEARCH REPORT USE
10.1 Approval of building products and/or materials can
only be granted by a building official having legal authority
in the specific jurisdiction where approval is sought.
10.2 Code Compliance Research Reports shall not be used
in any manner that implies an endorsement of the product
by Intertek.
10.3 Reference to the https://bpdirectory.intertek.com
is
recommended to ascertain the current version and status
of this report.
This Code Compliance Research Report (“Report”) is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and
its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than
to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Report. Only the Client is authorized to permit
copying or distribution of this Report and then only in its entirety, and the Client shall not use the Report in a misleading manner. Client further agrees and
understands that reliance upon the Report is limited to the representations made therein. The Report is not an endorsement or recommendation for use of
the subject and/or product described herein. This Report is not the Intertek Listing Report covering the subject product and utilized for Intertek Certification
and this Report does not represent authorization for the use of any Intertek certification marks. Any use of the Intertek name or one of its marks for the sale or
advertisement of the tested material, product or service must first be approved in writing by Intertek.