Technical Specifications

MATERIAL INFORMATION SHEET
I. PRODUCT IDENTIFICATION
Name: Armstrong Resilient Sheet Flooring Products and
Armstrong Resilient Tile Flooring Products
Description: Vinyl Flooring
II. DEPARTMENT OF TRANSPORTATION INFORMATION
Shipping name: Not Classified. Hazard Class: N/A. ID #: N/A
EMERGENCY ONLY CONTACT: CHEM-TEL -1-800-255-3924
III. HMIS (0=minimal hazard; 4 = severe hazard)
Health = 0 Flammability = 1 Reactivity = 0
IV. PRODUCT CONTENT
This product does not contain chemicals subject to the reporting
requirements of Section 313 of SARA Title III and 40 CFR 372. All
components are on TSCA inventory. This product does NOT contain
asbestos.
V. HAZARDOUS INGREDIENTS
(Chemical Identity; Common Name)
None
C.A.S. No.
N/A
%
N/A
OSHA PEL
N/A
ACGIH TLV
N/A
DESCRIPTION AND INGREDIENT INFORMATION
These vinyl flooring products are produced for residential and commercial (architectural) marketplace use. They come in a wide
variety of aesthetic designs, styles, colors, surface finishes, and sizes.
MISCELLANEOUS INFORMATION
Each of these products is classified as an “article” according to Title 29 of the Code of Federal Regulations, OSHA Part
1910.1200(c). They are formed to a specific shape or design during manufacture, have end use functions dependent upon
their shape or design, and do not release any hazardous chemical under normal conditions of use.
VI. PHYSICAL DATA
APPEARANCE: Material dependent. BOILING POINT
(degrees F): N/A. VAPOR PRESSURE (mm Hg @ 20 degrees
C): N/A. VAPOR DENSITY (Air = 1): N/A. PERCENT
VOLATILE BY WEIGHT (30 min. @ 275 degrees F): N/A.
EVAPORATION RATE (Butyl Acetate = 1): N/A. SOLUBILITY
IN WATER: N/A. SPECIFIC GRAVITY (H
2
0 = 1): N/A. pH: N/A.
VII. FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: N/A. FLAMMABLE RANGE: LEL = N/A; UEL =
N/A. EXTINGUISHING MEDIA: Water. SPECIAL FIRE
FIGHTING PROCEDURES: Protect fire fighters from toxic
products of combustion by wearing self-contained breathing
apparatus. UNUSUAL FIRE AND EXPLOSION HAZARDS:
None.
VIII. HEALTH HAZARD DATA
PRIMARY ROUTE(S) OF ENTRY: N/A. TARGET ORGANS:
N/A. EFFECTS OF OVEREXPOSURE: N/A SKIN AND EYES:
N/A. INHALATION: N/A. CARCINOGENICITY: NTP: No; IARC
Monographs: No; OSHA Regulated: No. MEDICAL
CONDITIONS GENERALLY AGGRAVATED BY
EXPOSURE: N/K. FIRST AID PROCEDURES: N/A SKIN
AND EYES: N/A. INHALATION: N/A. INGESTION: N/A.
IX. REACTIVITY DATA
STABILITY: N/A. INCOMPATIBILITY: N/A. HAZARDOUS
DECOMPOSITION PRODUCTS: N/A. HAZARDOUS
POLYMERIZATION: N/A.
X. SPILL OR LEAK PROCEDURES
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR
SPILLED: N/A. WASTE DISPOSAL METHOD: Dispose of in
accordance with Federal, State, and Local Waste Disposal
Regulations.
XI. SPECIAL HANDLING AND USE INFORMATION
VENTILATION: N/A. RESPIRATORY PROTECTION: N/A.
SKIN AND EYE PROTECTION: N/A.
XII. SPECIAL PRECAUTIONS
PRECAUTIONS TO BE TAKEN IN HANDLING AND
STORAGE: N/A. OTHER PRECAUTIONS: N/A.
XIII. WARNING
FOR PREVIOUSLY INSTALLED FLOOR COVERING
DO NOT SAND, DRY SCRAPE, BEADBLAST, OR MECHANICALLY
PULVERIZE EXISTING RESILIENT FLOORING, BACKING OR
LINING FELT. THESE PRODUCTS MAY CONTAIN EITHER
ASBESTOS FIBERS OR CRYSTALLINE SILICA. POSSIBLE
CANCER AND RESPIRATORY TRACT HAZARD BY INHALATION.
AVOID CREATING DUST. SMOKING BY INDIVIDUALS WHO HAVE
BEEN EXPOSED TO ASBESTOS FIBERS GREATLY INCREASES
THE RISK OF SERIOUS BODILY
HARM. RFCI’S (Resilient Floor Covering Institute)
RECOMMENDED WORK PRACTICES FOR REMOVAL OF
RESILIENT FLOOR COVERINGS ARE A DEFINED SET OF
INSTRUCTIONS ADDRESSED TO THE TASK OF REMOVING ALL
RESILIENT FLOOR COVERING STRUCTURES.
XIV. NOTICE
Various government agencies have regulations governing the removal
of inplace asbestos-containing materials. If you contemplate the
removal of a resilient floor covering structure that contains (or is
assumed to contain) asbestos, you should determine whether such
regulations apply.
The information presented herein is supplied as a guide to those who
handle or use this product. Safe work practices must be employed
when working with any materials. It is important that the end user
makes a determination regarding the adequacy of the safety procedures
employed during the use of this product.
N/A – not applicable or not available
N/K – none known or not known
Resilient Sheet Flooring Products and
Resilient Tile Flooring Products
Prepared 6/15
Armstrong World Industries, Inc.
P. O. Box 3001
Lancaster, PA 17604
www.armstrong.com
Technical Services:
1-877-276-7876, Option 2,3,3