Installation Instructions

7
Installation Guide | Panels
Rigid insulation
(See Fig.3)
Install the expanded metal lath as specified by the manufacturer’s insulated Forms.
Concrete fasteners that secure the expanded metal lath to the wall need to be long enough
to penetrate clear through the insulation and secure into the cured poured concrete wall.
Apply 1⁄2” thick scratch coat.
Figure 3
1. Rigid Insulation Board
2. Weather Resistive Barrier
3. Galvanized Metal Lath
4. Mortar
5. MStone Panels
* substrates and job conditions will vary greatly from site to site, therefore it is the responsibility of individual project engineers to review and approve
the suitability of mechanical anchors (wall ties) and the structural integrity of surfaces to be veneered