Installation Guide

ManualsBrandsDesigners Fountain ManualsLightingHana 1-Light Robusta Wood Style Finish Hanging Pendant

ASSEMBLY & INSTALLATION

INSTRUCTIONS

Please read carefully and save these instructions, as you may need them at a

later date. Questions, problems, missing parts? Before returning to the store, call

Designers Fountain Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday

1-800-228-6197.

_________

CAUTION

Turn off the main power at the circuit breaker before installing the fixture, in order

to prevent possible shock.

_________

GENERAL

All electrical connections must be in accordance with local and National Electrical

Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring

connections obtain the services of a qualified electrician.

Remove the fixture and the mounting package from the box and make sure that

no parts are missing by referencing the illustrations on the installation instructions.

____________________________

ASSEMBLY AND INSTALLATION

1. Attach the fixture screws (2) to the mounting bracket (3) and place the hex

nuts (5) onto the fixture screws (2). Do not tighten the hex nuts (5) at this

time.

2. Pull the power supply wires out from the outlet box (1), and mount the

mounting bracket (3) to the outlet box (1), using the mounting screws

(4).

3. Connect the black supply wire (9) to the black fixture wire (10) using a

wire nut (8). Connect the white supply wire (11) to the white fixture wire

(12) using a wire nut (8). Connect the fixture ground wire (7) to the power

supply ground wire (6) using a wire nut (8) [not included].

4. Place the canopy (13) over the outlet box (1) and onto the fixture screws

(2). Adjust the fixture screws (2) until they protrude out from the canopy

(13) 1/4". Remove the canopy (13) and secure the position of the fixture

screws (2) by tightening the hex nuts (5) against the mounting bracket (3).

Place the canopy (13) back onto the fixture screws (2), and secure it into

place using the decorative nuts (14) provided.

5. Screw the light bulb into the luminaire socket and make sure that the light

bulb does not exceed the maximum wattage specified on the luminaire’s

wattage rating label.

1. Outlet Box

2. Fixture Mounting Screw

3. Mounting Bracket

4. Mounting Screw

5. Hex Nut

6. Power Supply Ground Wire

7. Fixture Ground Wire

8. Wire Nut

9. Black Supply Wire

10. Black Fixture Wire

11. White Supply Wire

12. White Fixture Wire

13. Canopy

14. Decorative Nut

Summary of content (3 pages)

PAGE 1
ASSEMBLY & INSTALLATION INSTRUCTIONS Please read carefully and save these instructions, as you may need them at a later date. Questions, problems, missing parts? Before returning to the store, call Designers Fountain Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday 1-800-228-6197. _________ CAUTION Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.
PAGE 2
INSTRUCCIONES DE ENSAMBLAJE E INSTALACIÓN Por favor lea cuidadosamente y guarde estas instrucciones, puede necesitarlas posteriormente. Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Designers Fountain 8 a.m. – 6 p.m., Hora del Este, Lunes – Viernes 1-800-228-6197. _____________ PRECAUCIÓN Desactive la electricidad del cortacircuitos antes de empezar la instalación de la lámpara para evitar una descarga eléctrica.
PAGE 3
GUIDE D’ASSEMBLAGE ET D’INSTALLATION 1. Boite de Distribution 2. Vis de Luminaire 3. Support de Montage 4. Vis de Montage 5. Écrou Hexagonal __________ ATTENTION 6. Fil de Terre de l’Alimentation 7. Fil de Terre du Luminaire Couper le courant au niveau du disjoncteur avant d’installer la lampe pour éviter tout risque de secousse électrique. 8. Capuchon de Connexion 9. Fil Noir d’Alimentation Lire attentivement ce mode d’emploi et le conserver pour référence future.