4-Cube Organizer Assembly Instructions 3649 / 3651 / 3652 Tools Needed: 01- 3663 7/17
SAFETY PRECAUTIONS WARNING • This unit contains small parts which could be a choking hazard for small children. Children should be under adult supervision at all times or serious injury could occur. • Always unload unit prior to moving the unit. The weight of personal belongings can cause the unit to become unstable and either tip or collapse. Serious bodily injury and/or damage to personal belongings may occur. • Do not overload unit.
HARDWARE (H1) x 10 dowel DESCRIPTION (H2) x 8 hex screw QUANTITY A side panel 2 B top and bottom panel 2 C divider 2 D fixed shelf 1 B (H3) x 2 L-bracket screw #10 x 1/2” (H4) x 2 wall screw #10 x 1-1/2” C A A (H5) x 2 L-bracket D supplied C B Just call 1-800-874-0008 for parts and service. For faster service, have the style number ready when calling.
STEP 1 10x (H1) (H1) (H1) C (H1) D (H1) (H1) C (H1) (H1) (H1) x 10 dowel (H1) C (H1) (H1) 1. Arrange fixed shelf (D) and dividers (C) as shown. 2. Push dowels into holes on unfinished edges of each panel. One divider (C) will only have two dowels on one side.
STEP 2 C B C D C D C B 1. 2. 3. 4. Align dowels on divider (C) with center holes on fixed shelf (D) as shown. Push both dividers into place. Dowels in one divider (C) should interlock with second divider (C) on other side of fixed shelf (D). Align dowels on dividers (C) with center holes on both top/bottom panels (B). Push top/bottom panels into place.
STEP 3 (H2) 8x (H2) A C B (H2) (H2) C (H2) D B A (H2) (H2) (H2) x 8 hex screw 8X (H2) 1. Align 2 center holes in each side panel (A) with dowels in fixed shelf (D). Push to secure. 2. Secure side panels (A) to both top/bottom panels (B) using four hex screws for each panel. Tighten screws using supplied hex wrench. 3. Use stickers to cover any exposed hardware.
STEP 4 WARNING All units MUST be fastened to the wall. top panel top panel (H4) (H3) wall stud wall stud (H3) x 2 L-bracket screw #10 x 1/2” (H4) x 2 wall screw #10 x 1-1/2” (H5) x 2 L-bracket 1. Align top of unit with wall stud. 2. Place small hole end of L-bracket against wall/wall stud. Use 1-1/2” screw to secure L-bracket to wall. 3. Use 1/2” screw to secure L-bracket to top panel. L-bracket must be mounted no more than 1 1/2 inches from edge of panel.
