6-Cube Organizer Assembly Instructions 3653 / 3654 / 3656 Tools Needed: Optional Assembly 01- 3664 7/17
SAFETY PRECAUTIONS WARNING • This unit contains small parts which could be a choking hazard for small children. Children should be under adult supervision at all times or serious injury could occur. • Always unload unit prior to moving the unit. The weight of personal belongings can cause the unit to become unstable and either tip or collapse. Serious bodily injury and/or damage to personal belongings may occur. • Do not overload unit.
HARDWARE (H1) x 16 dowel DESCRIPTION QUANTITY A side panel 2 B top/bottom panel 2 C divider 4 D fixed shelf 1 (H2) x 8 hex screw B (H3) x 2 L-bracket screw #10 x 1/2” (H4) x 2 wall screw #10 x 1-1/2” C C A A (H5) x 2 L-bracket C supplied B Just call 1-800-874-0008 for parts and service. For faster service, have the style number ready when calling.
STEP 1 16x C C (H1) D C (H1) x 16 dowel C 1. Arrange fixed shelf (D) and dividers (C) as shown. 2. Push dowels into holes on unfinished edges of each panel. Two dividers will only have two dowels on one side.
STEP 2 C B C C D C C C C C 1. 2. 3. 4. D B Align dowels on dividers (C) with center holes on fixed shelf (D) as shown. Push dividers into place. Dowels in dividers (C) should interlock with dividers (C) on other side of fixed shelf (D). Align dowels on dividers (C) with center holes on both top/bottom panels (B). Push top/bottom panels into place.
STEP 3 (H2) 8x (H2) A C (H2) (H2) B B C C C (H2) D (H2) A (H2) (H2) x 8 hex screw 8X (H2) 1. Align screw holes in top and bottom panel (B) with screw holes in both side panels (A). 2. Secure top and bottom panels (B) to both side panels (A) using four hex screws for each panel. Tighten screws using supplied hex wrench. 3. Use stickers to cover any exposed hardware.
STEP 4 WARNING All units MUST be fastened to the wall. L-bracket must be mounted no more than 1 1/2 inches from edge of panel. panel A (H4) 1 in. MAX 1 2 (H3) wall stud (H3) x 2 L-bracket screw #10 x 1/2” (H4) x 2 wall screw #10 x 1-1/2” panel B (H5) x 2 L-bracket 1. Align side of unit with wall stud. 2. Place small hole end of L-bracket against wall/wall stud. Use 1-1/2” screw to secure L-bracket to wall. 3. Use 1/2” screw to secure L-bracket to panel B.
