Installation Instructions

7
If securing cabinet to cabinet:
1. Position the hang rod brackets (H6) into the desired position (approx. 2-1/8 in from top edge and 1-1/4 in from front edge) and secure using small screws.
If securing cabinet to wall:
2. Position the hang rod bracket (H6) into the desired position (approx. 2-1/8 in from top edge and 1-1/4 in from front edge) and secure using small screws to
cabinet.
3. Place the hang rod onto the secured hang rod bracket and make sure it is level. Mark the position of the other hang rod bracket (H6) against the open wall.
Predrill the bracket hole locations with a 1/4 in. hole. Insert wall anchors (H4) and secure the back support bracket with long screws (H3). Anchors are not
required if installing directly into studs.
STEP 4
(H2) x 4
small screw
(H2) x 2
small screw
(H6) x 2
hang rod bracket
(H6) x 2
hang rod bracket
(H2) (H2)
(H6) (H6)
(H6)
(H4)
(H3)
Wall
(H6)
(H2)
Cabinet
(H4) x 2
wall anchor
(H3) x 2
long screw