User Manual

This Manual is applicable to the Revised April 2nd 2015
De Sisti Super LED 4.7
Pag 6.
1st MENU
Displayed
(scrolling with the  and the  buttons)
2nd MENU
Displayed
(after pressing the X that stands for ENTER)
Explanation of Each MENU FUNCTION
CHANNEL SETTING (RESOLUTION & FUNCTION)
This Function is to set the DIMMING RESOLUTION either at 8 bits or at 16 bits.
Once CHAN is displayed, act on the  or  buttons to scroll through the following
choises:
 8D: 8 bits resolution (the display will show 8D and this is the default setting).
The Fixture utilises 1 DMX Circuit for the Light Dimming, which is the
BASE CIRCUIT set in the ADDRESS.
 8DS: NOT ACTIVE (for future use):
The foreseen function for this setting is: 8 bits resolution and STROBE (the display will show
8DS). The Fixture will utilise 2 DMX Circuits,
the BASE CIRCUIT set in the ADDRESS will be the LIGHT DIMMING
and the second circuit (BASE +1) will be the STROBE
 16D: 16 bits resolution (the display will show 16D).
The Fixture utilises 2 DMX Circuits,
the BASE CIRCUIT set in the ADDRESS is the Coarse Dimming,
the second Circuit (BASE +1) is the Fine Dimming.
 16DS: NOT ACTIVE (for future use):
The foreseen function for this setting is: 16 bits resolution and STROBE (the display will show
16DS). The Fixture will utilise 3 DMX Circuits,
the BASE CIRCUIT set in the ADDRESS will be the Coarse Dimming,
the second Circuit (BASE + 1) will be the Fine Dimming
.
the third CIRCUIT (BASE + 2) will be the STROBE
Of course the 16 bits function is useful if the corresponding circuits on the DMX
LIGHTING BOARD are also set at 16 bits.
WARNING: if the LED FRESNEL is set at 16 bits, but more units are having a consecutive unitary
address (for instance first fixture set at Address 1, second fixture set at Address 2 and so forth,
the DMX Channel controlling the Coarse Dimming of the second unit, will also control the fine
dimming of the first unit. In this case it is recommended that all fixtures are set to 8 bits
resolution).
DMX LEVEL
It Shows the DMX Input level on percentage (0-99% and FULL) received effectively
from the Fixture.
Press ENTER to exit this MENU.
7. CHARACTERISTICS AND PERFORMANCE DATA
DESCRIPTION VALUE DESCRIPTION VALUE
 LED Power 60 W  Protection Type
IP 22
 Power
Consumption
71W @ 230 V
75W @ 120 V
 Max Housing surface
temperature
70 °C
 DMX Data link
USITT DMX512-A
 This product uses a 5-pin
XLR for DMX input and
output.
 Use a shielded data cables.
 Do not overload the daisy
chain. Up to a maximum of 32
devices can be used on a
single DMX chain.

Weight of Fixture
M.O.
3,5 kg.
 Weight of barndoor
4 leaf 8 leaf
0,3 kg. 0,4 kg.
 DMX
Channels:
 1 at 8bit: Dimmer
 2 at 16bit: Dimmer

Weight of color frame
0,2 kg.
 Size of scrims & color
frame
Accessories Diameter
129 mm
 Size of Barndoor ring
Ring Diameter
133 mm
 Protection
Class
Class 1– ground connection
required

Lens diameter
120 mm.
Specifications subject to change without notice.