Owner manual

47
Real Time Clock
Menu Item
Display
Default
Range
Setting
Day of the week
Clock Day
Mon
Sun, Mon, Tue,
Wed, Thu, Fri, Sat
Time of day
Clock HH:MM
00:00
00:00 to 23:59
Reset clock
Clock UP to Reset CLK*
Ready
Ready, Done
* if the key is not pressed, the clock values will retain their original values, the display
will change to Done if the clock is reset
Relay Outputs (optional)
Push Select key to select relay. If Relay 0 appears, no relays are installed
Menu Item
Display
Default
Range
Type of relay
Relay 1 RelayType
Off
Off, Alarm, Cycl, Ev1 to Ev4
Action of relay
Relay 1 RelayAction
NDE
NDE, NE, NDEL, NEL*****
Type of alarm*
Relay 1 AlarmType
High
High, Low, Plus, Minus, Band
Alarm setpoint*
Relay 1 AlmHi/Lo SP
538°C
-73°C to 760°C (-100°F to 1400°F)
Alarm deviation*
Relay 1 AlmDevBand
3°C
1 to 56°C (1 to 100°F)
Inhibit alarm*
Relay 1 ALMInhibit
On
En or Dis
Type of event**
Relay 1 EventType
Time
Time or Temp
Event setpoint ***
Relay 1 Event SP
SPUpLim
SPLoLim to SPUpLim****
(repeat for relay outputs 2-4, if available)
* appears only for alarm types
** appears only for time or temperature event types
*** appears only for temperature event types
**** see enable page
***** Normally de-energized and non-latching, normally energized and non-latching, normally de-energized and
latching, normally energized and latching
Table of Settings
Relay
Type
Action
Alarm/
Event Type
Setpoint
Alarm
Deviation
Alarm
Inhibit