Specifications
Introduction
QT605 In-ceiling 2-way Speaker
Congratulations on your purchase of an Destination Audio QT605 thin line in-
ceiling 2-way speaker! Your speaker is the result of many years of research and
development dedicated to producing high quality products for home audio and
audio/video systems.
This manual contains features, setup recommendations and specications for
the Destination Audio QT605 thin line in-ceiling 2-way speaker. It is recom-
mended you thoroughly read through the material contained in this manual
before connecting your speaker. This will ensure you have a good understanding
of how to install your speaker for optimum performance; allowing for years of
listening enjoyment.
Break In Period
Allow several hours of listening time to adequately break in the speaker. As the
speaker breaks in, the driver suspension will loosen. The result of break-in will be
an increase in low frequency response, improved denition, clarity and detail.
1
Safety Compliance
The
se products are in compliance with the EMC Directive 89/336/EEC and Article 10 (1) of the
directive, in compliance with Technical Regulations EN55013-1 and EN50082-1.
Any RoHS compliant component is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury
(Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphe-
nyl ethers (PBDE). For Cadmium and Hexavalent chromium, there must be less than 0.01% of the
substance by weight at raw homogeneous materials level. For Lead, PBB, and PBDE, there must
be no more than 0.1% of the material, when calculated by weight at raw homogeneous materials.
Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must
not have been intentionally added to the component.
Front View Front With Grille On Back View