Specifications

FlameA.7 Multispectrum Infrared 8/01/2011

52-1002-8.1
X3302 Protect•IR
®
Multispectrum Infrared Flame Detector
X3302 Multispectrum Infrared Flame Detector (Spec Sheet: 90-1185) provides a solid
cone of vision for hydrogen fire detection coupled with superior false alarm rejection. The
detector utilizes advanced signal processing algorithms supported by an embedded 32-bit
microprocessor to provide continuous protection in the presence of false alarm sources and
environments with infrared radiation present. The very high version has a detection range
of 100 feet on and off axis to a hydrogen fire and is recommended for any indoor/outdoor
application. The detector is available in aluminum or 316 stainless steel. Standard outputs
include fire alarm, auxiliary alarm, and fault relays and RS-485 Modbus. Optional 4-20 mA or
Eagle Quantum Premier output is also available. Pulse output is available for easy retro fitting
into controller-based systems.
• Eagle Quantum Premier compatible
• Increased sensitivity and certified performance
• MTBF over 145,000 hours
• Beyond the standard for cone of vision, 100 feet on and off axis for hydrogen
• Microprocessor controlled heated optics, enable optimal performance in adverse environments
• Data logger for event time and date stamping
• Optional HART output and AMS aware
• Automatic optical integrity check on each sensor
• Calibrated manual testing/mag o
i
, no test lamp required
• Four conduit entries for easy installation
• IECEx, FM, CSA, ATEX/CE
• VdS verified
• Models available with integral explosion proof camera option (xWatch)
CONTROLLERSACCESSORIES
DETECTOR
KEY: = Required
= Option
= Choice Required
X3302
Flame A.7
LON Output Pulse Output
Eagle Quantum
Premier
®
Systems B.1
R74XX
Controllers
Flame L.1
HART 475
Communicator
Flame E.2
Q1116 Air Shield
Q1118 Flange/Air
Q2000 Weather Shield
Q2033 FOV Limiter
Flame K.3
Q1201C Laser
Aimer / Cone of
Vision Tester
Flame K.2
Mounting
Hardware
Q9033
Q1130
Flame K.5