Specifications

Control Room

B.6Systems8/01/2011 52-1002-8.1
Power Supply. Six approved power supply options are available:
• 10 Amp / 60HZ (EQ2110PS)*
• 30 Amp / 60HZ (EQ2130PS)*
• 75 Amp / 60HZ (EQ2175PS)*
• 10 Amp / 50HZ (EQ2111PS)*
• 30 Amp / 50HZ (EQ2131PS)*
• 75 Amp / 50HZ (EQ2176PS)*
Contact the factory for additional options and current certifications
*Requires the use of the DEC Power Supply Monitor, detailed below.
Power Supply
Model Part Number Description Ship Weight
EQ2110PS* 000604-013 EQ2110PS 10A 120VAC 60HZ 50 lb (25.0 kg)
EQ2130PS* 000604-014 EQ2130PS 30A 120/208/220 60HZ 115 lb (57.5 kg)
EQ2175PS* 000604-015 EQ2175PS 75A 120/208/220 60HZ 150 lb (75.0 kg)
EQ2111PS* 000604-034 EQ2111PS 10A 220/240VAC 50HZ 50 lb (25.0 kg)
EQ2131PS* 000604-035 EQ2131PS 30A 220/240VAC 50HZ 115 lb (57.5 kg)
EQ2176PS* 000604-036 EQ2176PS 75A 220/240VAC 50HZ 150 lb (75.0 kg)
*Requires use of EQ2100 Power Supply Monitor.
Ground Fault Monitor (For field power supplies and hazardous area location)
Model Part Number Description Material Thread Ports
FM/CSA
ATEX/CE
Ship Weight
EQ2203IDCGF 006943-002 Ground Fault Monitor AL 3/4 NPT 5 X 5 lb (2.3 kg)
EQ2207IDCGF 006943-003 Ground Fault Monitor AL M25/M20 5 X 5 lb (2.3 kg)
EQ2213IDCGF 006943-005 Ground Fault Monitor SS 3/4 NPT 5 X 10 lb (4.5 kg)
EQ2217IDCGF 006943-006 Ground Fault Monitor SS M25/M20 5 X 10 lb (4.5 kg)
EQ22EMIDCGF 000506-013
GF Electronic Module -
Panel Mount
3 lb ( 1.4 kg)
Power Supply Monitor (For use with power supply above)
Model Part Number Description Ship Weight
EQ2100PSM 006979-001 Power Supply Monitor 5 lb (2.3 kg)
*Enclosure not included.
Ground Fault Monitor IDCGF (Spec Sheet: 90-1134). The Initiating Device Circuit Ground
Fault module monitors the Eagle Quantum Premier system for ground faults and provides one
supervised digital input for detection of power supply trouble. It is intended for use with a
third-party power supply that supplies a dry contact output for indicating a trouble condition.
This module is housed in an explosion-proof NEMA 4X rated metal enclosure for installation in
hazardous locations and can be located at any point on the communication loop.
EQ2100PSM Power Supply Monitor (Spec Sheet: 90-1134) is used in conjunction with
any of the EQ21XX (p/n 000604-XXX) power supplies and backup batteries to provide an
approved source of power for the Eagle Quantum Premier system. Since the power supply
monitor resides on the communication loop (LON), any trouble condition related to system
power will immediately be reported to the Operator Interface Station through the Local Control
Unit. Status conditions being monitored include power supply failure, loss of AC power, loss
of battery power, power ground fault, AC voltage, DC voltage, and battery changing current
levels.
• Supports ANSI/NFPA 72 Class A, Style 7 communication
• Monitors primary AC supply and battery integrity
• Compatible with 10, 30 and 75 amp output power supplies
• Field addressable
• FMRC approved and CSA Certified for use in Eagle Quantum
• Feet for panel mounting