Specifications


DevicesC.13Systems 8/01/201152-1002-8.1
FlexVu
®
UD10 Universal Display
FlexVu UD10 Universal Display (Spec Sheet 90-1200) is recommended for applications
that require a gas detector with digital readout of detected gas levels. Its LON interface
board makes the FlexVu UD10 compatible with Eagle Quantum Premier systems by
digitizing the 4-20 mA analog signal from the attached sensor/transmitter and transmitting
the value as a process variable over the LON to the EQP controller. The UD10 is designed
for use with Det-Tronics’ gas sensors and transmitters. When used with the EQP controller,
it meets all gas performance standards.
• Compliance to ANSI/ISA-12.13.01-2000 performance standard
• Compliance to ISA-92.0.01 Part 1 peformance standard, and EN50104 for oxygen depletion
• Performance certified to FM 6310/6320, CSA 22.2 #152, ATEX EN60079-29-1, and
IEC60079-29-1
• IECEx, FM, CSA, and ATEX/CE hazardous location certifications
• Accepts 4-20 mA input from a variety of detection devices (Point infrared, Open path, catalytic,
toxic sensors, pressure, flow, etc.)
• Non-intrusive menu allows device calibration without de-classifying the hazardous area
• Continuously displays gas level, gas type, and units measured
• Alarm setpoints adjustable via network
• Data logger for event time and date stamping
• Heated backlit display
• IP66 rated
DISPLAY
DETECTOR
KEY:
= Required
= Option
= Choice Required
Combustible or Toxic Gas Detector
with analog 4-20 mA output
CONTROLLERS
Eagle Quantum
Premier
®
UD10/DCU
Universal
Display
Model STB
Sensor
Termination and
Separation Box