Specifications
D.1Systems SIL Certied
8/01/201152-1002-8.1
SIL 2 Certied Fire and Gas Detection System
EQ3001 Eagle Quantum Premier Controllers share a common hardware and software
platform with standard EQP Controllers. The SIL rated version of the Controller conducts
additional diagnostic checks and annunciates additional fault conditions. Using Det-Tronics
EQP Safety Controllers in redundant mode will increase their availability, but will have no
effect on their ability to perform a safety-related function. The redundant controller system is
certified for use as part of a SIL 2 system.
PointWatch Eclipse Infrared Gas Detector is a point infrared gas detector providing
detection of flammable hydrocarbon gases in the lower explosion limit (LFL) range. SIL 2
certified by exida to IEC-61508 for a 4-20 mA and relay output.
Multispectrum Infrared Flame Detector X3301 establishes a new benchmark in multiple-
fuel fire detection performance and false alarm rejection. The detector utilizes advanced
signal processing algorithms supported by an embedded 32-bit microprocessor to provide
continuous protection in the presence of false alarm sources and environments with infrared
radiation present. SIL 2 certified by exida to IEC-61508 for a 4-20 mA and relay output.
EQ3730EDIO Enhanced Discrete Input/Output Module (EDIO) module provides eight
channels of configurable digital input or digital output devices. The EDIO Module is specially
designed and certified to meet the requirements of IEC 61508.
Det-Tronics has the capability to offer a third-party approved SIL 2 rated fire and gas
detection system fully exida certified to IEC61508.