Specifications

REFERENCES
A.10References8/01/2011 52-1002-8.1
Document Charges
Certificates
Each
Approval Certificates (i.e. FM, CSA, ATEX, CE) No Charge
Certificate of Origin No Charge
Certificate of Origin – Notarized $35.00
Certificate of Origin – Chamberized $180.00
Calibration Certificate No Charge
Certificate of Guarantee/Warranty No Charge
Certificate of Quality No Charge
Compliance/Conformance Certificate No Charge
Test and Inspection Certificate No Charge
Consularized Documents Consult Factory
Custom Certificates $150.00
(Require Part Number and/or Serial Numbers etc)
Dossiers/Binders - Consisting of:
Index
Test Data
Product Specification Sheet $800.00 per set
Product Manual
Product Catalog
Any additions to above Consult Factory
Drawings:
Product Detail Drawing per product $800.00
Spare Parts List per product $800.00
Custom Drawings $800.00
Any additions to above Consult Factory
Product Manuals - Additional $2.00
Test Data $150.00
Courier of Documents (Letter Envelope only):
Domestic (within U.S.) $45.00
International $75.00
Note: The above prices are not discountable.
Miscellaneous Charges
Each
Assembly of product with another product $250.00 per set
Example: Transmitter and Sensor
Paper Tags (P/N = PAPER TAGS) $22.00
Stainless Steel Tags (P/N = STAINLESS TAGS) $30.00
Stainless Steel Tags Attached (P/N = SS TAGS ATTACHED) $70.00
Engineering testing for gas curves (must pre-qualify) $200
Det-Tronics may not accept some items for testing, such as hazardous, toxic, carcinogenic, pyrophoric, or hypergolic
materials. In this case, an estimated gas curve may be provided based upon the Material Safety Data Sheet (M.S.D.S.),
previous test data and engineering judgement. All requests for testing must be accompanied with an M.S.D.S for that
material before any shipment of the material is made. Recent Minnesota State law also may preclude Det-Tronics from
accepting or handling certain hazardous materials. Following is the recommended procedure for requests gas curve testing:
1. The request for gas curve testing, complete with appropriate M.S.D.S., should be issued to Det-Tronics Customer
Service Dept. A purchase order issued to Det-Tronics for testing services will be required upon request approval.
2. A one ounce sample of liquids or 7.5 liters of gaseous materials shall be packaged and shipped in the appropriate
container to the attention of: Gas Sensor gas curve Test Lab.
3. A Material Safety Data Sheet must accompany each sample to be tested.
4. Technical information typically required for each compound includes: specific gravity, molecular weight, vapor
density, flashpoint, and lower and upper flammability limit.
5. All sample materials will be returned to the customer after test completion for proper disposal.
Add $2000 to orders up to $250,000.
Please consult the factory for Inspections
of orders greater than $250,000 (This is
based on a local inspector.)
Example: SS Tag ($30) + Labor ($40) = Total ($70)
Note: The above prices are not discountable.
Inspection at factory