Specifications
FlameK.2Accessories
8/01/2011 52-1002-8.1
Laser, Laser Holder, W6300 Detector Inspector
Laser is for use with the Q1201A and Q1201C Laser Holder in sighting and testing the area
of flame detection coverage. Battery-powered laser projects a red beam of light and has a
toggle switch for turning the device on and off. When used with its holder, the laser beam
identifies the center and edges of the detector’s COV. Includes battery.
W6300B Inspector Connector with Inspector Monitor Software (Manual: 95-8581) for
use with X3301, X3302, X5200, X9800 and X2200 flame detectors. Allows for validation of
configuration and uploading of important detector status data such as power-up/down, faults
and alarms to a personal computer (PC) where it can be displayed, saved and/or printed.
Q1201A Laser Holder (Manual: 95-8404) is for use with the Laser for sighting and testing
area of flame detection coverage. Easily attaches to the front of Det-Tronics’ older model
UV, single frequency IR and UV/IR detectors for use during system startup, checkout, and
re-alignments. Designed to hold the Laser (which projects a red beam of laser light) to
show exact location of the center of the detector’s COV. Two additional holding positions
are available for locating the outside edges of the COV at either 40 degrees off center (80
degrees total COV) or at 45 degrees off center (90 degrees total COV). While laser is being
used to locate edges of the COV it can be rotated 360 degrees to identify the entire area of
flame detection coverage.
Q1201C Laser Holder (Manual: 95-8596) is for use with X3301, X3302, X2200, X5200,
X9800 and X3300 flame detectors. Easily attaches to the front of Det-Tronics’ X-Series flame
detectors for use during system startup, checkout, and re-alignments. Designed to hold the
Laser (which projects a red beam of laser light) to show exact location of the center of the
detector’s COV. Two additional holding positions are available for locating the outside edges
of the COV at either 30 degrees off center (75 degrees total COV) or at 45 degrees off center
(90 degrees total COV). While laser is being used to locate edges of the COV it can be
rotated 360 degrees to identify the entire area of flame detection coverage.
Laser
Description Part Number For Use With Ship Weight
Laser 006097-001 Q1201A, B, and C 1 lb (0.46 kg)
Battery, 3V Lithium 102871-001 <1 lb (<0.46 kg)
Q1201 Laser Holder/Aimer
Model Part Number For Use With Ship Weight
Q1201A1001 006066-001 C7050, C7052, U7602, X7050 2 lb (0.95 kg)
Q1201C1001 007255-001 X3300, X3301, X3302, X2200, X5200, X9800 2 lb (0.95 kg)
W6300 Inspector Connector
Model Part Number For Use With Converter Ship Weight
W6300B1002 (120/220 Vac) 007819-001 X3301, X3302, X5200, X9800, X2200 RS485 to RS232 serial <1 lb (<0.46 kg)
W6300B1003 (120/220 Vac) 007819-002 X3301, X3302, X5200, X9800, X2200 RS485 to USB <1 lb (<0.46 kg)