Specifications

FlameA.1 Multispectrum Infrared 8/01/2011

52-1002-8.1
X3301 Protect•IR
®
Multispectrum Infrared Flame Detector
X3301 Protect•IR Multispectrum Infrared Flame Detector (Spec Sheet: 90-1143, 90-1144,
90-1190) establishes the benchmark in multiple-fuel fire detection performance and false
alarm rejection. The detector utilizes advanced signal processing algorithms supported
by an embedded 32-bit microprocessor to provide continuous protection in the presence
of false alarm sources and environments with infrared radiation present. Multiple sensitivity
and output options are available enabling the X3301 to be used in a variety of applications.
For example, very high sensitivity version has a detection range of 210 feet (64 meters( to a
1 square foot n-Heptane fire. The medium sensitivity version has a detection range of 100
feet to a 1 square foot n-Heptane fire and is recommended for outdoor applications such
as offshore oil/gas platforms. The detector has Division and Zone explosion-proof ratings
and is available in aluminum or 316 stainless steel. Standard outputs include fire alarm,
auxiliary alarm, and fault relays and RS-485 Modbus. Optional 4-20 mA, Eagle Quantum
Premier
®
, or HART output is also available. Pulse output is available for easy retro fitting
into controller-based systems.
• Eagle Quantum Premier compatibility
• Increased sensitivity compared to traditional UV/IR detectors.
• Third-party certified performance to multiple fuel types
• MTBF over 145,000 hours
• Beyond the standard for cone of vision, 100 feet on and off axis for methane
• Microprocessor controlled heated optics enable optimal performance in adverse environments
• Data logger for event time and date stamping
• Automatic optical integrity check on each sensor
• Calibrated manual testing/mag o
i
, no test lamp required
• Four conduit entries for easy installation
• IECEx, FM, CSA, ATEX/CE, DNV, MED, ULC
• EN 54 part 10 certified by VdS, LPCB
• Meets Construction Product Directive
• Models available with SIL 2 certication
• Optional HART output and AMS aware
• Models available with integral explosion proof camera option (xWatch)
Meets NFPA 33 response requirements for under 0.5 seconds (available when model
selected).
CONTROLLERSACCESSORIES
DETECTOR
KEY: = Required
= Option
= Choice Required
X3301
Flame A.1
LON Output Pulse Output
Eagle Quantum
Premier
®
Systems B.1
R74XX
Controllers
Flame L.1
Q1201C Laser
Aimer / Cone of
Vision Tester
Flame K.2
Mounting
Hardware
Q9033
Q1130
Flame K.5
HART 475
Communicator
Flame E.2
Q1116 Air Shield
Q1118 Flange/Air
Q2000 Weather Shield
Q2033 FOV Limiter
Flame K.3