Specifications

TOXICS
Gas C.13 Toxics 52-1002-5 9/01/2008
Duct Mount and Sample Draw Adapters for Toxic Gas Detectors
C706X Series Duct Mount Adapter
x Enables monitoring of toxic gases within air handling systems while maintaining easy sensor
access
x Recommended for use on positive pressure ductwork with homogenous air mix conditions (non-
stratified)
x Use of flexible cabling recommended to enable sensor removal
Model Q812 Duct Mount Enclosure Series (Manual: 95-8459) Provides detection in environments
involving air handling, heating, ventilating, or air conditioning ducts.
x Mounts to a flat duct wall surface
x A stainless steel tube spans the cross section of the duct; a one-ft tube returns the sample
x Allows large volume, continuous air sampling
x Requires 600-4000 fpm velocity for adequate differential pressure
x Stainless steel NEMA 4X enclosure
x Compatible with all C706X sensors
C706X Series Sample Draw System Adapters
Adapter enables C706x sensors to function within gas sample extraction systems
x Stainless steel sampling system adapter
x Air-tight interface via seal O-ring eliminates gas sample leakage
x Includes inlet and outlet compression fittings for 0.25 inch outside diameter tubing
C706X Housing Duct Mount Adapters
Part Number Use With Ship Weight
226846-006 C7066, C7067, C7068, C7069 6 oz
(
0.17 k
g)
226846-002 C7064C, C7064E 6 oz
(
0.17 k
g)
NOTE: Not recommended for stratified or laminar air flow patterns.
Model Q812 Duct Mount Enclosure Series
Part Number*
Gas type and
sensor
Material
Tube
Leng th
Gas Measurement
Range
Ship Weight
000812-001
C7064E-H
2
S
SS ** 0-100 ppm 10.5 lb (4.8 kg)
000812-005
C7064E-H
2
S
SS ** 0-50 ppm 10.5 lb (4.8 kg)
000812-003 C7066E-CO SS ** 0-100 ppm 10.5 lb (4.8 kg)
000812-004
C7068E-SO
2
SS ** 0-100 ppm 10.5 lb (4.8 kg)
* Price includes preinstalled electrochem gas detector as noted.
** One inlet tube (000214-XXX) and one return tube (000214-130) at no extra cost, customer must specify desired inlet
tube length at order entry.
Model Q812 Sample Tubes
Part Number Material Ship Weight Length
000214-126 SS 8 oz (0.23 kg) 1 ft
000214-127 SS 1 lb (0.45 kg) 3 ft
000214-128 SS 3 lb (1.35 kg) 6 ft
000214-129 SS 6 lb (2.4 kg) 10 ft
000214-180 SS 9 lb (4.0 kg) 13 ft
000214-130* SS 8 oz (0.23 kg) 1 ft
* Return tube
Sample Draw Cup Assembly for C706X Toxics
Part Number Material Ship Weight
006517-001 SS 2.5 lb (1.28 kg)
006517-002 AL 1 lb (0.46 kg)
NOTE: Peripheral sampling system equipment required for proper operation.