Specifications

CONTROL ROOM
Systems B.5 Control Room 52-1002-5 9/01/2008
Power Supplies
Power Supply. Six power supply options are available:
x 10 Amp / 60HZ (EQ2110PS)*
x 30 Amp / 60HZ (EQ2130PS)*
x 75 Amp / 60HZ (EQ2175PS)*
x 10 Amp / 50HZ (EQ2111PS)*
x 30 Amp / 50HZ (EQ2131PS)*
x 75 Amp / 50HZ (EQ2176PS)*
Contact the factory for additional options and current certifications
*Requires the use of the DEC Power Supply Monitor, detailed below.
EQ2100PSM Power Supply Monitor (Spec Sheet: 90-1134) is used in conjunction with any of
the above power supplies and backup batteries to provide an approved source of power for the
Eagle Quantum Premier
®
system. Since the power supply monitor resides on the
communication loop (LON), any trouble condition related to system power will immediately be
reported to the Operator Interface Station through the Local Control Unit. Status conditions
being monitored include power supply failure, loss of AC power, loss of battery power, power
ground fault, AC voltage, DC voltage, and battery changing current levels.
x Supports ANSI/NFPA 72 Class A, Style 7 communication
x Monitors primary AC supply and battery integrity
x Compatible with 10, 30 and 75 amp output power supplies
x Field addressable
x FMRC approved and CSA Certified for use in Eagle Quantum™
x Feet for panel mounting
Ground Fault Monitor IDCGF (Spec Sheet: 90-1134). The Initiating Device Circuit Ground
Fault module monitors the Eagle Quantum Premier
®
system for ground faults and provides one
supervised digital input for detection of power supply trouble. It is intended for use with a third-
party power supply that supplies a dry contact output for indicating a trouble condition. This
module is housed in an explosion-proof NEMA 4X rated metal enclosure for installation in
hazardous locations and can be located at any point on the communication loop.
EQ2220GFM Ground Fault Monitor (Spec Sheet: 90-1134) provides ground fault monitoring in
a system that includes reliable dual isolated 24 Vdc power. The output from the ground fault
monitor is a contact closure in the presence of a ground fault. The ground fault monitor is DIN
rail mountable and is intended to be mounted in the same enclosure as the controller.
EQ2100PSM
Power Supply
Monitor
EQ21XXPS
Power Supply
Eagle Quantum
Premier
Ground Fault
Monitor
(IDCGF)
(EQ2220GFM)