Specifications

DEVICES
Systems C.5 Devices 52-1002-5 9/01/2008
EQ3740IPM Intelligent Protection Module
EQ3740IPM Intelligent Protection Module (Spec Sheet: 90-1184). The IPM is designed to
provide continuous and automated local area fire protection, while monitoring system operation
through continuous supervision of its inputs/outputs (I/O) and Local Operating Network/Signaling
Line Circuit (LON/SLC) connection to the EQP controller. In addition, the module contains a
unique “embedded logic program” that if enabled during configuration, allows the IPM to perform
local area protection in a “back-up mode” without controller interaction. The IPM utilizes eight pre-
configured I/O channels to perform its monitoring, supervision, and mitigation functions.
x Provides a pre-packaged single hazard protection solution to the Det-Tronics Eagle Quantum
Premier
®
system
x Eight independent, supervised I/O channels
x Individual channels have the pre-assigned functions necessary to deliver a single hazard
protection solution
x Supports two conventional “two-wire” smoke/heat zones including the ability to reset latched
zones. Does not require the use of “relay bases”
x Individual points are supervised in accordance with NFPA requirements for
alarm/supervisory/other input styles, notification/releasing outputs
x Panel or DIN rail mounting
x Meets the requirements of NFPA 72
ACCESSORIES
KEY:
= Required
= Option
= Choice Required
DETECTORS
CONTROLLER
Abort
Manual
Release
Supervisory
Device
Zone 1
Smoke and
Heat
EQ3740
Intelligent
Protection
Module
Release -1 Release -2
EQ300X
Controller
Mounting Option
(Panel or DIN
Rail)
Bell
Zone 2
Smoke and
Heat
LON Communication Loop