Specifications

95-8554187.2

CERTIFICATION—

APPROVED

For complete FM certification details, refer to Appendix A.

For complete CSA certification details, refer to Appendix B.

APPROVED

For complete ATEX certification details, refer to Appendix C.

NOTE

Operational performance veried from -40°C to +75°C.

NOTE

An optional third party addressable module can

only be used within the Ex d ameproof model

unless the addressable module is component

certied as Ex e for use within the Ex d e increased

safety model.

NOTE

Refer to “EOL Resistors” section for installation

details. All cable entry devices and blanking

elements shall be certified to “E-generation” or

“ATEX” standards, in type of explosion protection

increased safety “e” or ameproof enclosure “d” (as

applicable), suitable for the conditions of use and

correctly installed. They shall maintain the degree

of ingress protection IP66 for the apparatus.

Unused apertures shall be closed with suitable

blanking elements.

NOTE

For ATEX installations, the X9800 detector housing

must be electrically connected to earth ground.

IECEx

For complete IECEx certification details, refer to Appendix D.

VdS

Performance per EN54-10,

Certificate of Approval G-203084.

EC-Certificate of Conformity

08 0786 – CPD – 20779

EN54-10 Flame detectors - Point detectors.

For complete VdS certification details, refer to Appendix E.