Specifications

Table of Contents
DESCRIPTION..............................1
Outputs ................................1
LED ...................................2
o
i
(Optical Integrity) ......................2
Communication ..........................3
Data Logging ............................3
Integral Wiring Compartment ................3
SIGNAL PROCESSING OPTIONS ..............3
GENERAL APPLICATION INFORMATION.........4
Response Characteristics ..................4
False Alarm Sources ......................4
Factors Inhibiting Detector Response .........5
IMPORTANT SAFETY NOTES..................5
INSTALLATION..............................6
Detector Positioning .......................6
Detector Orientation.......................6
Protection Against Moisture Damage ..........7
Wiring Procedure .........................7
EOL Resistors (Not Used with EQP Model).....8
Setting Device Network Addresses
(EQ and EQP Models Only) ............13
STARTUP PROCEDURE .....................14
Fire Alarm Test ..........................14
TROUBLESHOOTING .......................14
MAINTENANCE ............................14
Cleaning Procedure ......................15
o
i
Plate Removal and Replacement . . . . . . . . . 15
Periodic Checkout Procedure...............15
Clock Battery ...........................15
FEATURES................................16
SPECIFICATIONS ..........................16
REPLACEMENT PARTS .....................18
DEVICE REPAIR AND RETURN ...............18
ORDERING INFORMATION ..................18
Accessories ............................18
X9800 Model Matrix ......................19
APPENDIX A – FM APPROVAL AND
PERFORMANCE REPORT ...................20
APPENDIX B – CSA APPROVAL...............23
APPENDIX C – ATEX / CE APPROVAL..........24
APPENDIX D – IECEx APPROVAL .............26
APPENDIX E – EN54 APPROVALS.............27
APPENDIX F – ADDITIONAL APPROVALS ......28