Manualshelf

Use and Care Manual

ManualsBrandsDetail K2 ManualsAutomotive4 ft. x 6 ft. 1,295 lbs. Payload Capacity Open Rail Steel Utility Flatbed Trailer
12345678910
En.a10 MMT4X60 man
ENGLISH
STEP 8
(CONTINUED)
Attach rear light brackets and install light assemblies. Connect light assembly to wiring
harness
The driver’s-side tail light is the one with the clear lenses on the bottom, the licence
plate bracket needs to be installed on the driver’s side as well at the same time.
Attach all necessary wiring and fasten lights to side of trailer.
NOTE: Use Dielectric grease on each connector for corrosion prevention