Use and Care Manual

5
8000lbs-S:
OUT
IN
1. Your 8000lb winch is designed with a bolt pattern that is standard in this class
of winch. Many winch mounting kits are available that utilize this bolt pattern
for the most popular vehicle and mounting channels. If you cannot find a kit
locally, contact us and we will provide you with the name of a dealer near you.
If you will utilize the mounting channel you must ensure that it is mounted on a
flat surface so that the three major sections (motor, drum and gear housing) are
properly aligned. Proper alignment of the winch will allow even distribution of
the full rated load.
2. Start by connecting the Roller Fairlead (Part# 800900) to the Mounting Channel
(Part# 801000) using 2 each of the Cap Bolt M10 X 35 (Part# 800002), Flat
Washer (Part# 800004), Lock Washer (Part# 800003) and securing with M10