Instruction Manual

ManualsBrandsDetcon ManualsEquipmentAV2-C1D2C

DETCON MODEL AV2-C1D2C

Hazardous Duty Class I. Div 2, Continuous Tone Alarm Station

Operator’s Installation and Instruction Manual

DETCON, Inc.

3200 Research Forest Dr.,

The Woodlands, Texas 77387

Ph.281.367.4100 / Fax 281.298.2868

www.detcon.co

May 20,2008 • Document #3079 • Revision 2.0

Summary of content (8 pages)

PAGE 1
DETCON MODEL AV2-C1D2C Hazardous Duty Class I. Div 2, Continuous Tone Alarm Station Operator’s Installation and Instruction Manual DETCON, Inc. 3200 Research Forest Dr., The Woodlands, Texas 77387 Ph.281.367.4100 / Fax 281.298.2868 www.detcon.com May 20,2008 • Document #3079 • Revision 2.
PAGE 2
AV2-C1D2C This page left intentionally blank AV2-C1D2C Instruction Manual ii
PAGE 3
AV2-C1D2C Table of Contents 1.0 1.1 1.2 Description................................................................................................................................................ 1 Strobe ................................................................................................................................................... 1 Horn......................................................................................................................................................
PAGE 4
AV2-C1D2C This page left intentionally blank Shipping Address: 3200 A-1 Research Forest Dr., The Woodlands Texas 77381 Mailing Address: P.O. Box 8067, The Woodlands Texas 77387-8067 Phone: 888.367.4286, 281.367.4100 • Fax: 281.292.2860 • www.detcon.com • sales@detcon.
PAGE 5
AV2-C1D2C 1.0 Description Detcon Model AV2-C1D2C audiovisual alarm stations are designed for installation and use in hazardous duty, corrosive work environments. The alarm station consists of two warning lights and a siren. The station can be wired to control circuit alarm devices for the purpose of warning personnel of hazardous conditions.
PAGE 6
AV2-C1D2C Enclosure Rating Height Diameter Type 4X, IP66 8.75in 5.5in. 1.2 Horn The alarm station vibratone® horn produces a noise level of a 100dB of sound by the electromechanical vibration of a stainless steel diaphragm. The horn mechanism with diaphragm is attached to the grill and has an effective broadcast range of 200 feet. The rugged water and dust tight backbox is ideal for indoor and outdoor use.
PAGE 7
AV2-C1D2C 2.0 Installation The assembly is mounted on a T-shaped Aluminum bracket with holes pre-drilled to accommodate (2) U-bolt attachments on a 2.5” maximum diameter pipe. U-bolt size is 3/8-16 x 3 inch. Overall Dimensions are 33”H x 16.5”W x 18.5”D (Figure 3). The alarm comes pre-wired for the voltage ordered from the factory (110 or 220VAC). Wiring is installed through the opening at bottom of junction box. Connect wiring in accordance with the wiring diagram shown in Figure 4.
PAGE 8
AV2-C1D2C G L1 L2 Grn/Ylw L1 L2 G Customer Input Wiring L1 Strobe 1 L1 Siren L1 Strobe 2 Ground can be connected to the Ground Screw or the connector. GND L2 (Neu) G GND L1 L2 Standard wiring shown on left. Optional: Removal of jumper between 5,6, and 7 for discrete annunciator wiring shown on right.